Sole-control-remotes TT8 Manuel d'utilisateur télécharger pdf (Page 13)

TT8

-12-

Quick-Start Operation:

STEP 1: Press and release any key to wake display up (if not already on).

Note: Installing the tether key will also wake up the console.

STEP 2: Press and release the Start key to begin belt movement at 0.5 mph, then adjust to the

desired speed using the Fast / Slow keys (console or hand rail). You may also use the rapid

speed keys 2 through 12 to set to a specific speed directly.

STEP 3: To slow tread-belt press and hold the Slow key (console or hand rail) to the desired

speed. You may also press the rapid speed adjust keys, 2 through 12.

STEP 4: To stop the tread-belt press and release red Stop key.

Treadmill Features:

Pause/Stop/Reset:

STEP 1: When the treadmill is running the pause feature may be utilized by pressing the red Stop

key once. This will slowly decelerate the tread-belt to a stop. The incline will go to zero percent.

The Time, Distance and Calorie readings will hold while the unit is in the pause mode. After 5

minutes the display will reset and return to the start up screen.

STEP 2: To resume your exercise when in Pause mode, press the Start key. The speed and

incline will return to their previous settings.

l Pressing the Stop key twice will end the program and a workout summary will be displayed. If

the Stop button is pressed a third time, the console will return to the idle mode (start up) screen. If

the Stop button is held down for more than 3 seconds the console will reset.

Incline:

l Incline may be adjusted anytime after the belt starts moving.

l Press and hold the Adjust  keys (console or hand rail) to achieve desired level of effort.

You may also choose a more rapid increase / decrease by selecting desired key, 2 through 12,

on left hand side of console (incline).

l The display will indicate incline numbers as percent of grade (the same as grade of a road) as

adjustments are made.

Dot Matrix Center Display (Manual Operation):

Ten rows of dots indicate each level of a workout. The dots are only to show an approximate level

(speed/incline) of effort. They do not necessarily indicate a specific value - only an approximate

percent to compare levels of intensity. In Manual Operation the Speed / Incline dot matrix window

will build a profile picture as values are changed during a workout. There are twenty-four columns,

which indicate time. The 24 columns are divided into 1/24

of the total time of the program. When

the time is counting up from zero (as in quick start) each column represents 1 minute.

Next to the Dot Matrix window are three LED lights labeled: Track, Speed and Incline, along with a

display button. When the Track LED is lit the dot matrix displays the Track profile, when the Speed

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Pas de commentaire

Sole-control-remotes TT8 Manuel d'utilisateur Page 13